Our Cargo Pod Includes:

White Gel Coat exterior color. Optional : Custom Gel Coat colors available. Our supplier follows the "RAL Colour Space System." Please call for a quote & availability
Six mount brackets, each CNC machined out of 6061 T6 aluminum
Front mount brackets attach to a bracket off of your main gear; Remaining four mount bracket locations each have up to 4”fore/aft mount adjustment within 4” carbon fiber reinforcement strap
Eight internal cargo retention brackets secured in place at our shop
Internal aluminum flange secured to pod with rubber molding around the entire pod to both seal and cushion the pod against the airframe
“Button” snap waterproof pod cover—protects the bottom of your fuselage from pod contents
Contoured flush front fuel filler neck cover (where fuel module filler would exit the pod; secured with flush-mount Allen screws) to weather seal the front of your pod
Hinged access door measures 9” (rear height) x 13” (front height) x 41” (length)
Optional : We can ship your pod without any provision for adding a later fuel module. In other words, in this optional case, the front of your pod would not need the above flush front fuel-filler-neck cover. We would simply not cut out the front of the pod to allow for a later fuel module. If you change your mind you could later do so yourself
Optional : Call for custom mount bracket location needs.

Our Fuel Module Includes:

23 gallon capacity slide-in/slide-out module
Front fiberglass retention “angle” bracket
Rear hinged retention bracket
Flush fill cap
Threaded, hinged, retention rod (secures rear retention bracket in place)
Prosealed access panel (for access to inside of fuel module if needed)
Two internal side-to-side fuel baffles (mitigate fuel fore-aft “slosh”)
SAF-AIR CAV-110 push type fuel drain valve
AN-4 fuel pick up fitting (including pre-installed fuel pick up tube)
AN-4 fuel breather/pressure port fitting
Grounding strap
Contoured front-of-pod cover to secure and seal the fuel filler neck where it exits the pod